Sapphire Pro Hard Surface Cleaner

Sapphire Pro Hard Surface Cleaner First results noticeable within 2 hours after application. Fast acting and reliable results. Suitable for application on a broad array of surfaces Full Description Sapphire Pro, a biocide derived from plants, which offers curative properties for controlling algae on outdoor structures and building materials, encompassing all hard surfaces—both porous and non-porous—in green areas, and on various roof types (excluding thatched roofs). Sapphire Pro delivers rapid and enduring effects, often noticeable within a few hours under optimal conditions. It's suitable for year-round application on all approved surfaces. The water needed for dilution is significantly less compared to many other biocidal treatments, ensuring ease of use and cost-effectiveness. Sapphire Pro imposes no re-entry restrictions as per label instructions and is sanctioned for use in organic systems. Knapsack Spraying Rate When using a 15 Litre knapsack fill half of it with water. Add 1L of Sapphire Pro. Continue filling until at 15 Litres. This solution is sufficient to treat an area of 555m² using a red even fan 80 04 nozzle. Our Recommendation Always read the product label before use. Thoroughly mix before application and continue to agitate during use. Exercise caution to prevent spray drift onto neighbouring crops or plants. Avoid application during rainy conditions or on frozen surfaces. After treatment, refrain from cleaning the surface and allow the product to take effect for several days. Clean equipment thoroughly after each use. Technical Specification Product Sapphire Pro Hard Surface Cleaner Brand Sapphire Period Of Use All Year Round Pack Size 1 Litre & 5 Litre Active Ingredient 500g/L nonanoic acid Application Method Boom Sprayer, Knapsack Knapsack Sprayer Rate 1L in 15L of Water Covers 555m² Area of Use Hard Surfaces Boom Sprayer Rate 18L per ha in 250L of water Pack Size Coverage Up to 2775m² Treats (Pest / Weed / Disease) Green Algae

To use Sapphire Pro Hard Surface Cleaner, first sweep the area, then dilute the concentrate (e.g., 1L per 20L water for heavy jobs) and spray it evenly onto dry surfaces on a bright, dry day, ensuring plant protection; allow 2-4 days for it to work (no rinsing needed), then brush away dead growth, and repeat if necessary, always reading the label for specific dilution and PPE. After Application Wait: Do not rinse or scrub; let Sapphire work for 2-4 days (or longer in cool weather) to kill moss, algae, and grime. Clean Up: After treatment, brush or rinse away the dead organic matter. Repeat: Reapply if needed for severe infestations. Safety & Tips PPE: Wear gloves and eye protection; avoid splashes and inhalation. Read Label: Always follow the specific instructions on your product's label. Storage: Keep in a cool, dry, well-ventilated place, above 8°C if possible. Clear the Area: Sweep or blow off loose dirt, leaves, and debris; ensure the surface is dry. Protect Surroundings: Cover or wet nearby plants and vegetation. Dilute: Mix according to the task (e.g., 1L Sapphire Pro with 20L water for heavy growth, or 500ml with 20L for maintenance). Apply: Spray evenly onto the surface, ensuring complete wetting. Apply on a dry, sunny day for best results.